Carlton 2518 Betreibershandbuch PDF herunterladen (Seite 80)

18” DRUM MACHINE MAINTENANCE

53

GENERAL INSPECTION

• Check all screws, bolts, and nuts on the

chipper at least once a month unless

otherwise specified. Check for tightness

and wear. Replace any that won’t stay

tightened or that have missing or

chipped threads. Check holes for wear

or distortion and replace any parts

necessary.

• All guards and covers must be in place

and in good condition without any gaps

or openings. Replace any bent or

damaged guards or covers immediately.

• Check condition of springs. Replace any

that have gaps or overlapped coils.

TIRES AND AXLES

• Check tires air pressure daily. Inflate

tires as necessary. Keep tires air

pressure adjusted based on the

temperature and the load.

• When towing, make sure the chipper is

sitting as close to level as possible to

ensure proper tire wear and axle

alignment.

• Check lug nuts for proper tightness.

Tighten when necessary. Replace lug

nuts if the threads are worn, chipped, or

missing.

• Check tire rims for damage that could

cause improper air pressure. If rims are

damaged beyond repair, replace.

• See Dexter information for E-Z Lube®

or Nev-R-Lube

® Axles supplied in this

manual. Remember to inspect axles

regularly.

• Check and replace dust caps as needed.

FRAME

• At least once a month, check the chipper

frame and other permanent parts for

cracks, bends, failed welds, or other

damage that needs repair. Repair as

necessary or contact an authorized

dealer.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 198 199

Kommentare zu diesen Handbüchern

Keine Kommentare