Carlton SP8018 TRX Spezifikationen PDF herunterladen (Seite 30)

SP8018 TRX DAILY CHECKLIST

10

• Check engine oil at dipstick. Engine

must be level. Boom in raised position

will not affect the engine position,

machine must be on level ground. Add

recommended oil, as required. (See

Engine Owners Manual)

• Inspect dry air filters. REPLACE, if

necessary, WITH FACTORY AIR

FILTER ONLY. Do not blow out or tap

on ground. Replace inner safety filter

when dirty or when the outer air filter

has been changed 3 times. Do not blow

out the inner safety filter or tap on

ground. (See Engine Assembly section

for part numbers.)

• Check fuel filter for debris or water.

Replenish fuel tank with fresh fuel.

• Check condition and tightness of drive belts.

(See Servicing Belts section)

New belts

will stretch and become loose as

machine runs. Check belt tension often

when belts are new.

• Check hydraulic oil level. A sight glass

is located on the tank. Add oil if

required. In hot weather do not fill

window full, the oil will expand and spill

out.

• Check for any loose, broken or missing

teeth and pockets.

• Inspect bolts, hydraulic fittings, wiring

harnesses, hoses, and equipment for

tightness, wear, or leakage. Replace if

necessary.

• Grease jackshaft and boom bearings

daily, apply only 2 to 4 shots of grease.

Do not over grease.

• Cutter wheel shaft bearings must be

purged with grease daily. Purge until

clean grease is seen.

•

Check the condition of the tracks and adjust

tension if necessary (see Maintenance

section).

CUTTER WHEEL BEARINGS

ENGINE LEVEL

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 100 101

Kommentare zu diesen Handbüchern

Keine Kommentare