Carlton SP8018 TRX Spezifikationen PDF herunterladen (Seite 44)

SP8018 TRX MACHINE OPERATION

• Raise cutter wheel clear of stump and

return to center position.

• Reduce engine speed to idle. DO NOT

TURN OFF MOTOR. Engine must be

allowed to cool slowly at idle for 3-5

minutes to avoid damage.

• With engine at idle; disengage drive

belts by pushing and holding the belt

switch down until the actuator pushes

the clutch arm all the way to the stop.

• ENGINE SPEED MUST BE AT IDLE

TO ENGAGE OR DISENGAGE THE

CLUTCH OR DAMAGE WILL

OCCUR.

• After cutter wheel has come to a

complete stop, turn the machine around

and you can move the pile of chippings

around using the blade that comes with

the SP8018 TRX.

• Turn off motor. Allow cutter wheel to

come to a full stop before inspecting

work area.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 100 101

Keine Kommentare

Carlton SP8018 TRX Spezifikationen Seite 44