Carlton SP8018 TRX Spezifikationen PDF herunterladen (Seite 52)

SP8018 TRX SERVICING BELTS

Replacing Engine Belt

SAFETY

• NEVER SERVICE A MACHINE WITH THE ENGINE RUNNING, SEVERE

PERSONAL INJURY COULD OCCUR. TURN ENGINE OFF THEN REMOVE

IGNITION KEY AND DISCONNECT POSITIVE BATTERY CABLE TO AVOID

STARTING MACHINE ACCIDENTALLY.

• THE CLUTCH MUST BE DISENGAGED BEFORE TURNING ENGINE ON/OFF

AND BEFORE SERVICING A MACHINE. OTHERWISE SEVERE PERSONAL

INJURY COULD OCCUR AS WELL AS MACHINE DAMAGE.

• ALL MACHINE PARTS MUST COME TO A COMPLETE STOP AND HAVE

TIME TO COOL COMPLETELY BEFORE SERVICING A MACHINE OR

SEVERE INJURY COULD OCCUR, POSSIBLY SERIOUS BURNS AND/OR

DISMEMBERMENT.

• PLACE THE CUTTER WHEEL ON THE GROUND WHEN PERFORMING

SERVICE ON A MACHINE.

• Remove engine belt guard cover, by

removing the nine bolts that hold it on.

• Make sure the clutch has been

disengaged. NEVER SERVICE A

MACHINE WITH THE CLUTCH

ENGAGED SEVER INJURY COULD

OCCUR.

• Loosen both outside jam nuts on the

engine slide adjustment. Push engine

back toward the cutter wheel to loosen

belt. Try to loosen each jam nut equal

amounts.

• When belt is loose, remove it and

replace with a new belt.

LOOSEN JAM NUTS ON THE OUTSIDE OF THE ENGINE

SLIDE ASSEMBLY – MOVE ENGINE BACK

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 100 101

Keine Kommentare

Carlton SP8018 TRX Spezifikationen Seite 52