Carlton SP8018 TRX Spezifikationen PDF herunterladen (Seite 37)

100

101

SP8018 TRX MACHINE CONTROLS

SAFETY

• NEVER SERVICE A MACHINE WITH THE ENGINE RUNNING, SEVERE

PERSONAL INJURY COULD OCCUR. TURN ENGINE OFF THEN REMOVE

IGNITION KEY AND DISCONNECT POSITIVE BATTERY CABLE TO AVOID

STARTING MACHINE ACCIDENTALLY.

• CUTTER WHEEL MUST BE DISENGAGED BEFORE TURNING ENGINE

ON/OFF AND BEFORE SERVICING A MACHINE. OTHERWISE SEVERE

PERSONAL INJURY COULD OCCUR AS WELL AS MACHINE DAMAGE.

• ALL MACHINE PARTS MUST COME TO A COMPLETE STOP AND HAVE

TIME TO COOL COMPLETELY BEFORE SERVICING A MACHINE OR

SEVERE INJURY COULD OCCUR, POSSIBLY SERIOUS BURNS AND/OR

DISMEMBERMENT.

• PLACE THE CUTTER WHEEL ON THE GROUND WHEN PERFORMING

SERVICE ON A MACHINE.

PROGRAMMING – RADIO

(WIRELESS) TRANSMITTER

• If there is a problem with the receiver or the

transmitter and either has to be replaced, you

will need to program the new unit to

communicate with the existing unit. Or if

you have more than one transmitter for this

machine, it will need to be programmed to

communicate with the existing receiver.

• To program the transmitter and receiver, you

have to download the transmitter’s unique

code into the receiver. There are complete

instructions along with colored illustrations

in the radio control manual included in the

back of this manual.

• To access the receiver, remove the front

cover from the machine control box.

• Remove the cover of the remote receiver

with the radio receiver attached. This will

make it easier to work with the radio

receiver. Remove the radio receiver panel

by unlatching the plastic tabs on either side

of the receiver; see the radio control manual

included in this manual at the back. The

receiver panel will now slide out of the cap.

• Follow the instructions in the radio control

manual, included at the end of this manual,

to download the ID Code. There are

specific instructions that need to be followed

and corresponding illustrations.

REMOVE THE REMOTE

COVER TO ACCESS THE

RADIO RECEIVER UNIT

RELEASE THE RADIO

RECEIVER CAP BY

UNLATCHING THE

TABS ON EACH SIDE

REMOVE

COVER

BE SURE TO PUSH THE RECEIVER PANEL BACK UP INTO

THE COVER UNTIL THE TABS SNAP BACK INTO PLACE.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 100 101

Kommentare zu diesen Handbüchern

Keine Kommentare

Carlton SP8018 TRX Spezifikationen Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Carlton SP8018 TRX